/(''
(1
&DUOR'H*LRUJL
,167$//$7,21$1'',6$66(0%/<
1. Remove the red cap from the optical fibre and insert the metal part into
the front of the LED.D. (screw to install, making sure that it is straight).
2. Fix the light shield to the top of the optical fibre.
3. To disassemble follow the indications above in reverse order.
4. Battery replacement: press the button on the bottom of the main unit,
pull the cover back and open it, take the battery out, then disconnect
the plug. Connect the plug of the new battery correctly then fix the
battery in place, push the cover back up on the main unit until it is
closed correctly.
23(5$7,21
1. Press the “mode” button to select the required operating mode (the
indicator for the mode selected comes on).
1) “
” Full power: when the ON/OFF button is pressed the blue
light comes on at maximum intensity.
2) “
” Ramp: The power of the blue light increases gradually
reaching maximum power 5s later.
3) “
” Pulse: The blue light works in pulses.
2. Press the “time” button to choose the setting time. 8 working time
modes are available: 5s - 10s - 15s - 20s - 25s - 30s - 35s - 40s.
3. When the operating mode and time are both set, the curing light will
memorize the settings and work with these settings during the
following session.
4. When operating, aim the blue light at the correct position and then
press the ON/OFF button, the machine produces a “beep” sound and
operates with the blue light in accordance with the selected settings.
The digits on the screen commence a countdown and the appliance
stops working when the countdown reaches “0”, after which the digits
on the screen return to display the selected time setting.
5. During operation the appliance can be stopped at any time by pressing
the ON/OFF button.
6. An acoustic signalling device inside the appliance produces a “beep”
sound whenever the ON/OFF button is pressed and when the set
operating time has terminated.
