INSTALLATION
EN
AH-13-01-R8 (09/2022)
18 / 55
www.carlisleft.com
NOTE
WARNING
!
Figure 10: Brush Tip New and Worn
PAINT
A proper paint mixture is essential to the electrostatic
operation. Due to the method of electrostatic
atomization the viscosity and conductivity levels of
the paint are important to ensure proper application.
Paint test equipment such as the test assembly
(76652-03) for testing paint electrical resistivity, may
be purchased through your Ransburg distributor. (See
“Paint and Solvent Specifications” in the “Appendix”
section of this service manual.)
Most paint suppliers may be of assistance in pre-
adjusting the paint for proper electrostatic sprayability.
Item #
Description
1
2
BRUSH TIP NEW AND WORN
(Figure 10)
New Brush Tip
Worn Brush Tip
When the radius portion of the brush plastic tip is
gone, the brush will need to be replaced soon.
When the gun switch is
ON
, the bell will be rotating
and high voltage will be activated. Steps
MUST
be
taken to ensure grounding of personnel and equipment
for safety. Electrical shock may occur if the equipment
and/or personel are
NOT
grounded.
2
1