Thermal•Aire II Convection Tray Cart | 13
Figure 11
Figure 11a
Figure 11b
Figure 11c
MAINTENANCE
MONTHLY MAINTENANCE
• Check the screws on latches and hinges of doors.
Adjust if necessary.
• Gaskets: Check condition and tightness.
Change if necessary.
• Middle wall: Check if properly fastened.
Tighten nuts if necessary.
SIX (6) MONTH MAINTENANCE
• Casters: Check fasteners, proper operation, and brake locking.
• Air Dams: Check proper operation.
MAINTENANCE
Procedure to remove or install the Air Dam:
(this is to be done when cleaning the wall)
• Align the Air Dam on the 2 screws specially designed to
accommodate it (Figure 11a).
• While pressing the Air Dam on the wall, slide it horizontally until
it passes the pin and you hear the locking sound (Figure 11b).
!
IMPORTANT:
• The Air Dam should slide freely from bottom to top (Figure 11c)
To remove the Air Dam, proceed in reverse order.