Carlisle Binks AG360 Series, Руководство по обслуживанию

Страница: 19 / 28

EN
Thoroughly clean gun head.
Examine spray process to reduce
spray fog.
Gradual build-up of bounce-back
on gun head.
Paint build-up on tip retainer.
CORRECTION CAUSE
TROUBLESHOOTING SPRAY
PERFORMANCE
Gun spits paint when triggering
on due to paint build-up inside
air cap between spraying
operations.
Replace seat.
Needle seat/needle leakage.
Needle seat not fitted correctly
in gun head.
Coating type promotes build-up. Consult coating supplier.
Damaged or partially blocked tip. Check for damage or blockage.
Replace or thoroughly clean tip
and cap.
Damaged or partially blocked tip.
Tip seat worn in rear of tip.
Needle seat not tight. Tighten.
Tip retainer fills with paint when
triggered.
Tip not seated correctly.
Remove, clean and reinstall tip
into gun head.
Paint build-up on fluid tip.
Tighten.
Check for damage or blockage.
SB-E-2-646 R1.1
19/28
www.carlisleft.com