
1.2
This symbol on the product or on the packaging indicates that the product shall not be
treated as household waste, as it shall be delivered to an authorised waste collection point
for recycling of electric and electronic devices.
For more detailed information about recycling of this product, contact the local authority,
the local waste disposal service.
Do not position the machine in close proximity of water jets or heat sources. Avoid the
direct contact with water or other liquids also during cleaning.
Do not expose the machine to weather conditions (sun, rain, etc.).
Before plugging the machine in, make sure the power switch is on “0” position. For electric
safety of the machine, it is necessary to provide a grounding system complete with a resi-
dual current circuit breaker (max IDN = 30mA). Before connecting the device, make sure
the data on the plate correspond to the power mains. The manufacturer declines any lia-
bility for failure to comply with the above or for damages caused by the failure to properly
ground.
Unroll the power cord for its entire length to prevent the risk of dangerous overheating.
The electric system must be equipped with an omnipolar switch, in compliance with the
applicable safety regulations, with contact opening gap and allowing the complete discon-
nection in the conditions of the overvoltage category III.
Unplug the machine for any intervention of routine maintenance or checking.
WARNING
Do not pull the power cord to unplug the
machine from the electric socket.
Remove the water tank from the machine when it is to be filled or for any other checking
operation.
Never touch the hot parts of the machine.
Never touch the machine when hands or other body parts are wet.
Never immerse the machine in water.
The machine delivers high-temperature drinks. Avoid the risk of burns.
The manufacturer declines any liability for damage to things and/or persons arising from
an improper use of the machine and/or an incorrect maintenance.
In case of fault or malfunctioning of the machine, switch it off and unplug.
In case of power cord damage, have it replaced to prevent any risk.
In case the machine is not used any longer, render it inoperative.
Содержание BlueDot
