CARIF 450 BA, Инструкция по эксплуатации

Страница: 8 / 40

8
450 BA
1. 2 Axes numerical control with USB keyfor
updates, easy and fast storage for up to
100 cutting programs with visualization
of all parameters
2. Hydraulic block for a fine regulation of
bow feed and cutting pressure
3. Speed moto-variator, electronic version
Kw 4
4. Graduated plate for miter cutting 0/60°
independent from the plans for pieces
support2
5. Hydraulic devices for vertical clamping
of bars
6. Hardened and carburized jaws for strong
fixture and moving of full bars
7. Safety guards
8. Robust head structure made in one
unique piece of structural steel
9. Wide Plans for piece support for a
comfortable and practical cutting area
10. Roller-unit L=1m for bar support
11. Working light
12. Sensor for monitoring blade rotation
13. Flushing hose
14. Blade tensioning by springs
15. Adjustable Blade-guides with carbide
plates
16. Large basement for easy cleaning
17. Complete coolant equipment inside of
50 Lt. tank with electro-pump 0,12Kw
18. Bimetal blade M42 mm 3660x34x1,1
19. Frame Cylinder
20. Vice Cylinder
21. Movable carriage vice
22. Vertical roller for bars adjusting
23. Electrical cabinet
24. Hydraulic cabinet
• Piece lenght automatically controlled by
a magnetic rule
• Sensor for monitoring blade rotation
in case of blade breakage or sliding on
pulleys
• Frame case protected by a micro-switch
to stop the blade when opened
• Frame height controlled by a
potenziomenter
• Hydraulic stroke of the carriage that
allows to carry on solid material up to
330mm round and 450x240mm plate
• Cardboard box + pallet, service
wrenches, instruction manual and spare
parts list included