32
450 BA
Take the sawing frame (bow) to the top till the mechanical shoulder, pressing
and taking BOW FEED lever in the blue section. When the high mechanical shoulder is
reached press
. A message on display is confirming the entering of level, then the
following screen is appearing:
Take the sawing frame (bow) to the bottom till the mechanical shoulder, pressing
and taking BOW FEED lever in the red section. When the down mechanical shoulder is
reached press
. A message on display is confirming the entering of level and then
the performed calibration.
Press
to come back to MODE SELECTION screen.
5.2 Sawing Frame (bow) calibration
Switch on the CNC card. Press
to perform carriage calibration.
The following screen
is showed:
Press:
Press:
BOW CALIBRATION
Proceed?
<START>Yes <STOP>No
BOW CALIBRATION
Take bow towards top
<ENTER>Confirm
BOW CALIBRATION
Take bow towards bottom
<ENTER>Confirm
MODE SELECTION
1. Semiautomatic
2. Automatic
3. Machine parameters
After completing carriage calibration, the following screen is showed:
Press
+
simultaneously. The following screen is showed:
Содержание 450 BA
Страница 2: ...450 BA...
