Set wireless remote control (CF RX TX)
3 functions
Cargofloor.com
Page 9
Version 01 / 05-07-2021
PROGRAMMING THE REMOTE CONTROL TO THE RECEIVER
The cover of the receiver is fitted with four screws, which must be unscrewed completely before opening
it. When the cover is put back, all screws must be screwed fully back in again.
Receiver 3-function, inside view
Programming the remote control to the receiver
If you have ordered a remote control and receiver as a set, they are already connected to each
other. A set is "plug and play".
If a new, or second, remote control has to be used in combination with the receiver, you can connect them
as follows:
Press the "Function" programming button once,
Press the "Select" programming button once (All output LEDs light up (02) and (12)),
Hold down buttons 1+2 on the remote control for at least 2 seconds.
Should you need further instructions, please contact Cargo Floor B.V.
Technical data
Connection voltage
12-24V
Operating temperature
-
20…+55°C
Frequency band
2405-2480 MHz
Power LED (yellow)
Input power +
“Function” program button (chancel)
Transistor output loading
“Select” program button (OK)
Output relay
LED’s (red) loading
Function
LED’s
Transistor output unloading
Input power -
Output relay
LED’s (red) unloading
F
S