Carex AccuRelief ACRL-9000, Руководство пользователя

Страница: 18 / 36

18
n
Affix gel pads so that they do not overlap one
another and are approximately 2 inches apart.
STEP 4
Operating the TENS unit
Once the gel pads are attached, the TENS unit is
ready to be switched on.
NOTE: You cannot turn the gel pad units
on by pressing the remote control.
1. Press the
+
button on the gel pad unit to turn the
gel pad on. A steady green light indicator light will
turn on to let you know the gel pad is on.
2. Using either the remote control or the gel pad
units, press the
+
button to increase or the
–
button to decrease the intensity.
NOTE: There are 20 levels of intensity.
Explanation of LED indicator on gel pads units:
Steady solid light – the unit is on
Flashing – the unit is in use
Rapid flashing – the unit is receiving
STEP 5 Turn off the device
You can turn device off in the following ways:
n
The device will turn off automatically after 30
minutes treatment time.
n
Press the
–
button continuously until the LED
light turns off.
n
Turn the device off by pressing the button
on the remote control.