Carex AccuRelief ACRL-9000, Руководство пользователя

Страница: 17 / 36

17
n
Do not mix old and new batteries or different
types of batteries.
STEP 1
Cleaning of skin
Clip excess hair from the treatment area and
remove any jewelry that may come in contact with
the stimulation of the
device. Wash area with
soap and water, and dry
completely.
STEP 2
Preparation of
the TENS unit
Each gel pad is pre-fixed
with a stud to connect to
the back of the device,
and is protected by a
transparent film. Attach
the gel pads to the back of
the device, pressing them
in place.
STEP 3
Placing the gel pads
If using only one gel pad
for treatment, remove
the layer of protective
transparent film and place that side of the gel pad
to the skin, positioning the gel pad on the area of
pain. If using both gel pads, position them around
the area of pain in a linear path at least 2 inches
apart. Press to ensure adhesion. Please refer to
page 20 to understand where to place gel pads for
optimal treatment.
PLEASE NOTE:
n
GEL PADS ARE REPLACEABLE. (AccuRelief™
Supply Kit Item #ACRL-0003)
TREATMENT INFORMATION