1
5
2
3
4. Installation on Wall/
Overhead-shower
Step 1 : Disconnect your shower-head
from the shower arms & clean the
thread with sandpaper
Step 2 :
Ensure the washer is inserted
into the top connector of SIFT+. Wrap
the thread of the shower arm and
the bottom connector of the shower
filter with Teflon tape to prevent
leaks.
Step 3:
Align the SIFT+ top connector
with the thread of the shower arm &
rotate clockwise to tighten
.
Step 4:
Turn on the water and let the
water flow out for 3 minutes. This will
flush out harmless discoloured water.
Step 5: Align the bottom thread
connector of your SIFT+ the shower-
head connector and rotate clockwise
to tighten fully. Use a spanner to
tighten, if there are leaks, check /
insert washers and tighten again.
* SIFT+ will fit on all standard shower arms.
v4-WaterFiltermanual.indd 10-11
21/11/20 11:35 AM
