
Cod. +030220151 - Rel. 2.1 - 04/09/98
41
What to do if the IR32S, IRDRSE/S0 fails to work
PROBLEMS
CAUSE
CHECK
compressor will not start :
•
power on
•
compressor LED off
if H1=0
wrong mode: heating instead of
cooling or vice versa
parameter r3
if A4=3, check state of digital input
compressor will not start :
•
power on
•
compressor LED flashing
compressor delay operating
parameter c0, c1 and c2
temperature is outside set limits but
no alarm signalled and buzzer, if
fitted, does not sound
alarm delay operating
check Ad
AL or Ad alarm signalled (Multi-
function input) without in fact being
active
Multi-function input generates
alarm as power goes on
check connection of input and
whether it is off in normal operation
alarm connected to Multi-function
input does not operate
alarm delay operating or
programming error
see whether A4=1 or A4=2;
if A4=1 check state of digital input;
if A4=2 check A7
defrost not activated :
•
power on
•
defrost LED off
if H1=1
•
defrost cycle too short (dp)
•
interval between defrosting
dl=0: in this case defrost will
not be activated
parameter dP and dl
manual defrost not activated and
defrost LED flashing
compressor protection delays
operating
parameter d9 (select d9=1, see
instructions)
high temperature alarm given after
defrosting
alarm delay after defrost too short
or alarm threshold too low
parameters d8 and AH
when H1=1, display override
remains even after defrost
ambient temperature has not yet
reached value set, or time d8 has
not yet elapsed
wait or reduce d8
after changing a value, or
programming continues to work with
old values
unit has not yet updated of re-start
unit, parameters has not been
satisfactorily completed, pressing
switch off and parameter, control or
programme again correctly
cycle continuos is not actived
it is necessary to press
before
.
see note on page 8
With the factory settings it can happen that within the 120 minutes delay set (Ad) the unit fails to
reach the range of +/- 10 degrees (AL and AH) around the set-point selected for the temperature
alarm. If this occurs we suggest to increase the delay by changing parameter Ad.
What to do if the IR32Y fails to work
Содержание IR32C
Страница 36: ...Cod 030220151 Rel 2 1 04 09 98 35...
Страница 37: ...Cod 030220151 Rel 2 1 04 09 98 36...
Страница 38: ...Cod 030220151 Rel 2 1 04 09 98 37...