Carel Heez, Техническая брошюра

Страница: 60 / 68

28 Heez +050002745 rel. 1.2 - 16.11.2021
ENG
Table of initial configuration parameters
C at. C ode D escription D ef Min Max User
Ctl St Set point 3.5 °C r1 r2 U
Ctl r6 Night time operation: activation delay
0= disabled 4 h 0 999 S
Ctl r7 Night time operation: duration 10 h r13 999 S
Ctl r12 Night time operation: light deactivation delay 0 min 0 999 S
Ctl r10 Normal operation: light on delay 0 min 0 999 S
Ctl r13 Recovery time:
0=automatic evaluation of night time set point disabled 4 h 0 r7 S
Ctl r4 Night time operation: min set point delta 3 °C -20 r5 S
Ctl rPc Night time operation: set point correction 0 -10 (50%) 10 (-50%) S
CFn HSL Enable self-learning 0/1 = No/Yes 0 0 1 S
CFn HSO Self learning sensitivity
0/1/2 = low/medium/high = 90/60/30 min 1 0 2 S
CFn HSr Reset self-learning 0/1 = no/yes 0 0 1 S
dEF dt End defrost threshold 1.5 °C 1.5 9.9 S
dEF ddt Defrost evaluation time 60 min 0 999 S
dEF dP Maximum defrost duration 20 min 0 199 S
rtc h Date/time: hour* - 0 23 S
rtc m Date/time: minute* 0 0 59 S
rtc d Date/time: day* - 1 31 S
rtc M Date/time: month* - 1 12 S
rtc y Date/time: year* - 0 99 S
rtc thS Time band: start hour* 8 h 0 23 S
rtc thE Time band: end hour* 20 h 0 23 S
rtc tnS Time band: start minute* 0 min 0 59 S
rtc tnE Time band: end minute* 0 min 0 59 S
rtc tb1…
tb7 Time band: enable day 1…7*
0/1=No/Yes - 0 1 S
HMI /r Buzzer 0/1=No/Yes 1 0 1 S
HMI /4 Display
0= control temperature
1= intake temperature
2 = result of mitigation algorithm
3 = set point
4 = “.” 0 0 4 S
HMI /5 Unit of measure 0/1 = °C, bar, cl/°F, psig, FlOz 0 0 1 S
ALM A10 Door open alarm 1 delay 5 min 0 20 S
Tab. 4.a