T
RAVEL
'
R
P
ATIO
A
WNING WITH
BT12
15
FAQ
S
T
HE
I
NDICATOR
L
IGHT
B
LINKS ON THE
BT12
C
ONTROL
B
OX
.
o
The indicator light on the control module shows the function status of the
control module.
o
Solid ON indicates power is supplied to the control module.
o
One long blink and one short blink indicates
power and 1 peripheral (i.e. remote or motion
sensor) is paired to the module.
o
One long blink and multiple short blinks
indicates power and multiple peripherals are
paired to the module. The number of short
blinks is based on the number of peripherals
paired.
o
The module does not blink for being paired to a
mobile device with the Carefree Connects
Mobile App.
T
HE
S
YSTEM
B
EEPS AND THE
A
WNING
P
ARTIALLY
R
ETRACTS
.
o
The motion sensor batteries are low, the awning will beep every 30 seconds
(when the power switch is ON) and the awning will partially retract. This will
continue until the batteries are replaced. The awning will operate normally
after the batteries are replaced. Battery replacement is described on page 8.
T
HE
R
EMOTE
D
OES
N
OT
W
ORK
Confirm that the remote is paired. The module indicator light will blink when
peripherals are attached (see description above).
In the mobile app on the “Peripherals Page” confirm that the remote is connected.
Green indicates the remote is connected, red indicates device is paired but not
connected. No listing indicates the remote has not been paired.
o
Remote not paired. Refer to page 10 to pair the device.
o
Remote is paired but not active. The remote has an approximate operating
range of 30 feet depending on obstructions (such as walls and other
vehicles). Move closer to the awning and control module.
o
Remote is paired but not active. Batteries need to be replaced. Battery
replacement is described on page 7.
BT023
Indicator
Light
