E
CLIPSE WITH
BT12
7
O
PTIONS
The BT12 Wireless Control System offers several options to enhance your
awning experience. OEM’s may install these options as a standard offering or
can be added to your system at a later date. Contact your Carefree sales rep
about these options.
BT
R
EMOTE
The optional BT Remote provides the advantage of allowing you to operate the
awning from any convenient location.
The remote has an operating range of approximately 30 feet. Actual distance may vary
depending on the installation, and proximity of obstacles (such as other vehicles, wall
construction etc.)
To use: turn system power ON (see page 6).
Extend
Press and release. The awning will
extend out to the full extension and
stop automatically.
Retract
Press and release. The awning will
retract and stop automatically when
the awning is fully retracted.
LED Controls
The LED controls are for white LED’s wired through the BT12 Control Module.
Turn the LED power switch to ON (refer to page 8).
The remote ON/OFF button allows you to turn the LEDs ON/OFF (the LED power
switch must be ON).
Press and hold the LED Bright/Dim buttons to adjust the LED brightness level.
Battery Replacement
The remote uses one (1) CR2032 battery; batteries are available at local battery
outlets.
1. Carefully
remove
the back cover using a
coin in the slot at the bottom corner of the
remote.
2. Remove the old battery and insert a new
battery with the “+” terminal facing up.
3. Snap the back cover on.
CR2032
Coin
Slot
Remove Back Cover
Replace Battery
Match Battery
Orientation
BT008
