Carefree of Colorado
8
B
ATTERY
R
EPLACEMENT
–
C
URRENT
C
ONFIGURATION
The motion sensor uses two (2) “AAA” alkaline batteries. Batteries are available
at local battery outlets.
7. Open the awning to access the motion sensor that is located in the lead rail on the
motor side of the awning.
8. Remove the sensor module from the awning.
9. Remove the screws and the rear cover.
10. Remove the two batteries.
11. Make sure that the contact tabs are clean and bent out for best contact.
12. Insert new batteries. Match the new battery orientation with the old batteries.
Tip: Place the battery end next to the PC board first then swivel the other end into
the case. This will set the batteries firmly into the case.
13. Check that the seal is in place and flat then attach the rear cover with the
screws removed previously.
14. Install the module back in the awning.
BT017a
Remove Screws
and Cover
Remove Old Batteries
Insert New Batteries
Insert These
Ends First
PC Board (ref)
Remove Screws and
Motion Sensor From Bracket
Seal (ref)
Содержание BT12
Страница 18: ...Carefree of Colorado 18 ...
Страница 19: ...FREESTYLE RM AWNING 19 ...