C
AREFREE OF
C
OLORADO
S
UNDIAL
P
ATIO
A
WNING W
/
M
ANUAL
O
VERRIDE
9
052537-001r5
Wireless Switch Installation
CAUTION
T
HE WIRELESS WALL SWITCH IS DESIGNED AS AN INTERIOR SWITCH ONLY
.
M
OUNTING THE SWITCH OUTSIDE OR
IN AN AREA DIRECTLY INFLUENCED BY ADVERSE ENVIRONMENTAL FACTORS CAN CAUSE PREMATURE DAMAGE TO
THE SWITCH AND VOID WARRANTY
.
SunDay009b
Switch Plate
Switch
Mounting Bracket
1 5/8”
3 7/16”
Bend Tabs Around
Drywall as Tightly
as Possible
Figure 11. Mounting the Wireless Switch.
1. Determine the location of the switch. The switch should be positioned so that the operator can see the
awning operate.
2. Carefully cut a hole 1 5/8" wide x 3 7/16" tall into the wall.
3. Press the mounting bracket into the hole and bend the bracket tabs tightly around the drywall as shown.
4. Program the switch and control box. Refer to "Programming a Transmitter" on page 9.
5. After programming is complete, attach the switch and switch plate to the mounting bracket using the
furnished screws.
6. If all options are installed, attach the control box cover.
Programming a Transmitter
The wireless wall switch and hand held remote are both available as a single channel or multiple channel. A
single channel transmitter controls one awning, the multiple channel transmitter can control up to 4 separate units
individually or as a group. Transmitters require a control box installed.
SunDay009a
s
o
mfy
s
o
mfy
Control Box
Single Channel
Remote
Rear View
Multiple Channel
Remote
Channel Selector
Channel Selection
Indicators
Programming
Button
Programming
Button
Reciever
LED
Programming
Button
Single Channel
Switch
Left Side View
Multiple Channel
Switch
Channel Selector
Channel Selection
Indicators
STOP
STOP
SET
Wireless Wall Switch
Hand Held Remote
Figure 12. Programming a Transmitter.
Table of Contents
Содержание SUNDIAL PATIO AWNING
Страница 20: ...Table of Contents...
