CareCo Marina Luxury Bath Lift, Руководство пользователя

Страница: 19 / 28

19
TAKING THE LIFT OUT OF THE BATHTUB
First use the manual control to lower the bath lift all the way and allow the backrest to
pivot all the way back until the power unit stops by itself in its end position (photo 21).
In doing so, ensure that the backrest does not hit the wall of the tub. Then unplug the
manual control.
• Fold the side flaps on the seat surface inwards.
• Fold the backrest forwards. To hold the lift, use the hand grips on the drive unit.
• You must ensure that the lifting rod is always fully retracted (photo 23).
• The drive unit can now be removed from the seat frame in the direction of the arrow.
Incorrect Correct
NOTE The drive unit can be removed only at a particular angle. It can
therefore no longer be removed from the seat unit when it is folded com-
pletely forward since it is then locked into place again. Bring the backrest
into the angle as shown in photo 24 and then remove the drive unit from
the seat frame in the direction of the arrow.