Warranty:
Your CareCo branded product is under warranty to be free from defects in material and workmanship
for one year from date of purchase. This warranty expresses our confidence in the workmanship and
materials used for our products. In the event of a defect covered by this warranty, CareCo will, at our
discretion, replace the product or supply parts to remedy. This warranty does not cover device failure
due to owner misuse or negligence, or due to normal wear and tear. The warranty does not extend to
non-durable parts, such as rubber accessories, which are subject to normal wear and tear and require
periodic replacement. If you have any queries please contact CareCo.
CareCo, Hubert Road, Brentwood,
Essex CM14 4JE
www.careco.co.uk
Storing the Massager
• Store the Massager in a clean and dry environment, away from direct sunlight or heat-emitting
appliances.
Cleaning the Massager
• Unplug the power cord before cleaning. Do not use corrosive cleaners such as benzene or diluent etc.
• Use a dry cloth to wipe the control panel clean. Using a damp cloth to clean the control panel may
lead to malfunction.
Using the Power Adapter
• Please check the power source voltage meets product specification requirements. This product runs
on AC power source only.
• Do not plug or unplug the power cord with wet hands.
• Do not place heavy objects on the power cord or adapter.
• Do not wrap the power cord around the product.
• Do not use if the power cord is damaged.
(220V–240V).
- Wrap the Massager around body parts to massage. Use the Velcro to adjust the belt length to a
comfortable position.
2. Starting massage:
- Press the ON/OFF button to start the Massager.
- Press the AUTO/MANUAL button. The massager will begin to massage automatically. The
intensity will increase or decrease. The massager will work as per pre-set program.
- Press the AUTO/MANUAL button twice to switch to the manual model. You can then adjust the
speed by pressing the +/- buttons.
- It is suggested that you do not massage any area for longer than 10 minutes.
3. Finish the massage:
- Press the ON/OFF button to stop the Massager.
NOTE:
-
The default intensity is ‘low’ (the first level).
-
If you begin to feel uncomfortable, stop the massage immediately.
-
Do not leave the Massager on continuous use for longer than 30 minutes.
Maintenance and Storage
