25
24
Continued from
previous page
•
The cordless
phone is too close
to the Smart
Dialler
•
Separate the cordless
phone and Smart Dialler
by a greater distance
especially if the cordless
phone is a higher powered
type
The home phone
connected is not
functioning.
•
The phone lines
are not connected
correctly to the
main unit.
•
The “FUNCTION”
switch is not set in
either “ALARM” or
“MUTE” position.
•
Make sure the main
incoming phone line is
plugged into the “LINE”
socket and the cable from
home phone into the “TEL”
socket.
•
Set the “FUNCTION” switch
to either “ALARM” or
“MUTE” position.
There are static noises
when using the phone.
•
The phone line is
loose.
•
The phone line
cable is damaged.
•
The phone may be
too close to the
Smart Dialler.
•
The phone or
phone battery may
be the cause
•
There may be a
Telecom Issue
•
Plug the phone jack firmly
in the socket.
•
Replace the phone line
Cable.
•
Separate phone & Smart
Dialler as much as
possible.
•
Replace the cordless
phone battery or the
phone.
•
Contact your Telecom
Service Provider
The Star Key will not
open two way
communication on the
Smart Dialler
•
The phone
receiving the call
may not be
returning the Star
Key signal.
•
You may have a
piggy back plug at
the telecom port &
picking up
interference by
what is running
through the other
leg of the double
•
Press the Star Key for a
longer period or try using
another phone.
•
Rearrange such that you
only have the dialler
connected to a single plug.
