Care of Sweden CuroCell S.A.M., Инструкция по эксплуатации

Страница: 7 / 20

7
3. Installation and Start-up
3.1 Installation
When unpacking the mattress, check that none of the parts are damaged. In the event of
damage, contact Care of Sweden or your local distributor before using the product.
1a. If the mattress is an overlay mattress, place the mattress on top of an existing mattress. If
possible, secure it by pulling the elastic bands on the bottom over the corners of the
underlying mattress.
or
1b. If the mattress is a replacement mattress and have an integrated foam core ( CuroCell
S.A.M. ® CF16), place the mattress directly on to the bed base. U se the straps on the cover to
fasten the mattress to the bed base.
2. Hang the pump by the foot end of the bed
or place it on a flat sturdy surface. Place the
power cable so there is no risk of stumbling
over it, run it over with the bed wheels, or
getting it jammed when raising or lowering
the bed.
NOTE! A pump bag is
available as an option.
3. Connect the mattress'
air hoses to the side of
the pump. If the pump
and hoses are equipped
with quick connectors,
an audible "click" will be
heard when these have been connected correctly.
4. Check to make sure that the power is set to ’0’ (off). Plug in the power cable into an
approved outlet (220 V).
3.2 Start-up and settings
NOTE!
Always read the instructions for use prior to use.
1. Start the pump by pressing ’1’ (on), on the side of the pump. The green light is lit.
2. The pump starts filling the mattress with air. It takes approximately 15-20 minutes.
NOTE!
• Make up the bed with sheets to increase user comfort.
• Check that the CPR-valve is closed.