T
his Quick Guide is not a substitute to the user manual and addresses only
a limited scope of features and functions of your
cardo SHO-1
. Use it to
look up basic functions and commands while you are on the road without the
user manual.
This Quick Guide can be printed and folded for easy reference while on the
road, or it may be viewed directly on your smartphone or tablet.
scala rider G9 Unit
1
|
GENERAL FUNCTIONS
Power ON / OFF
Press
for 2 seconds
• ON: 3 BLUE f ascending tone
• OFF: 3 RED f descending tone
Volume
Tap or to adjust and set volume of current audio source
Mute / Unmute
Tap and simultaneously
Battery level
indicator
In Standby, press and for 5 seconds
• Blue LED = Full charge
• Purple LED = Half charge
• Red LED = Almost empty
Hear Your Buddy
Name
In Standby, tap
and
simultaneously
Paired Device
Indication
In Standby, press
and
for 2 seconds
If “One+8” Buddies are within range, purple LEDs flash for
2 seconds
Play Paired Buddy List
In Standby, press
for 2 seconds
Group Signal
Tap
twice
Enable / Disable VOX
(For Intercom calls only)
In Standby, press and for 2 seconds
• Enabled: Blue flash for 2 seconds
• Disabled: Red flash for 2 seconds
Enable / Disable
Spoken Status
Announcements
Press
and
for 2 seconds
2
|
VOICE COMMANDS
1. In Standby, tap
or speak any word loudly to activate VOX
2. Speak a Voice Command from the table below:
Current Mode
Desired Action
Say this:
Standby / FM / A2DP
/ AUX
“One+8” Intercom Call
<<Buddy Name>>
Intercom call with A or B
“Call Intercom”
Standby
Start A2DP
“Music ON”
Turn on FM
“Radio ON”
FM Radio
Turn off FM
“Radio OFF”
Next Station Preset
“Next Station”
Previous Station Preset
“Previous Station”
A2DP Music
Next track
“Next track”
Previous track
“Previous track”
Stop / Pause A2DP
“Music OFF”
3
|
SETTINGS MENU
Enter Settings Menu
In Standby, press
for 2 seconds and follow
the spoken instructions
Exit Settings Menu
Press
for 2 seconds
4
|
MAIN UNIT LED INDICATION
None
cardo SHO-1 is OFF
1 BLUE flash every 3 seconds
Standby mode
– No active audio
2 BLUE flashes every 3 seconds
Active mode
– Call in progress / music or other
audio source is ON
1 RED flash every 3 seconds
Standby mode
– Battery is low
2 RED flashes every 3 seconds
Active mode
– Battery is low
Solid PURPLE
USB connected
Solid RED (battery LED)
Charging
5
|
VOICE CONNECT (VOX)
VOX Sensitivity
(Default: Medium)
Adjust via the Settings Menu, the App or the
Cardo Community
.
High:
Use this setting if it is difficult to activate VOX
Low:
Use this setting if it is too easy to activate VOX
VOX Operation
Mode
VOX can be set to activate the Voice Command (default) or to
start an Intercom Call via the
Cardo Community
or the App
6
|
PAIRING BLUETOOTH DEVICES:
MOBILE PHONE/GPS/A2DP MUSIC PLAYER
Bluetooth Channel 1
pairing mode
In Standby, press for 5 seconds
Bluetooth Channel 2
pairing mode
In Standby, press for 5 seconds
To pair a GPS, when LEDs begin rapidly alternating, tap .
™
Volume Down
• Intercom
• On / Off
Music and Mobile
Voice Command
Volume Up
