6
4.2 GENERAL FUNCTIONS
Power ON
Press for 2 seconds
3 BLUE flashes with ascending tone
Power OFF
In Standby, press for 2 seconds
3 RED flashes with descending tone
Volume
Tap
a
or
a
to adjust and set volume of current
audio source
Mute / Unmute
Tap
a
and
a
simultaneously
Enable / Disable
VOX (For Intercom
calls only)
In standby, press
a
and
a
simultaneously for
2 seconds
ENABLED: Blue flash for 2 seconds
DISABLED: Red flash for 2 seconds
4.3 STATUS LIGHTS
None
SRC-System™ is OFF
1 BLUE flash every 3 seconds
Standby mode
No active audio sources
2 BLUE flashes every
3 seconds
Active mode – Call in progress / music
or other audio source is ON
1 RED flash every 3 seconds
Standby mode – Battery is low
2 RED flashes every 3 seconds Active mode – Battery is low
Solid RED
Charging
4.4 AUDIO SOURCES AND PRIORITIES
If two connected audio sources try to play audio simultaneously, your
SRC-System™ automatically determines which audio source to play
through the speakers based on the priority of the connected devices.
Higher Priority
1. Mobile Phone audio or GPS instructions*
2. Intercom /
Click-to-Link
3. A2DP (Stereo
Bluetooth
) audio
* GPS instructions from Smartphone GPS Apps are
prioritized like A2DP audio
Lower Priority
For example:
• Incoming mobile phone calls interrupt ongoing intercom calls
• Incoming intercom calls will interrupt ongoing A2DP music
• Intercom and
Click-to-Link
calls have the same priority. So
Click-to-Link
calls will not interrupt any Intercom call in progress,
and vice-versa.
A2DP audio priority can be configured higher than Intercom audio
priority – see section 3.
4.5 VOICE CONNECT (VOX) SETTINGS
Your SRC-System™ offers VOX technology for safe and hands-free
operation of some key functions.
The VOX can be customized to adjust its sensitivity level. VOX
activation for Intercom calls can also be disabled completely.
You can choose between ‘High’, ‘Medium’ (default) and ‘Low’ VOX
sensitivity.
If you experience difficulties starting a conversation using VOX,
change setting to ‘High’.
If VOX keeps starting calls involuntarily, change setting to ‘Low’.
