Enhancement # 2 -
GAIN CONTROL
The BTA II comes equipped with a
Gain Control
feature
that allows you to increase the volume
heard
by the party
you are calling.
NOTE:
Turning On
Gain Control
may also result in an
echo being heard. If this occurs, turn Off
Gain Control
to
fix this problem.
HOW TO ADJUST GAIN CONTROL ON THE BTA II:
1. To turn On/Off
Gain Control
,
press and hold
the
Gain Control
button
for 7 seconds.
- A
single flash
of the
red
LED indicates
that you have turned Off
Gain Control
.
- A
double flash
of the
red
LED indicates
that you have turned On
Gain Control
.
7. Resetting your BTA II
To reset the BTA II to its factory defaults:
1. Put the BTA II into
Auto-Configuration
mode while it is
not plugged into a mobile phone.
2. Wait
until
the
red
LED shuts off and the blue LED
begins flashing every 3 seconds.
For more information, visit our website at
www.cardowireless.com
.
Troubleshooting and Reference
8. Troubleshooting your BTA II
1.
PROBLEM:
When powered ON, the BTA II flashes blue
every second and doesn’t ever switch to a slow
blue flashing (STANDBY Mode); after 5 minutes
of flashing blue every second, it shuts off.
SOLUTIONACTION:
a.
Your BTA II is not able to find or connect to the
headset. Make sure that the headset is turned ON
and that they have been paired correctly. To re-
pair your headset and adapter, refer to
Section 2:
Pairing your adapter.
*
* Cardo is not responsible for problems arising
from difficulties with non-Cardo headsets.
2.
PROBLEM:
After ending a call, I can still hear some sound
coming from the headset’s speaker for about a
minute.
ACTIONSOLUTION:
A. By default, the BTA II will stay connected to the
headset for up to one minute after a call is ended.
B. If you
auto-configure
your BTA II, you may be
able (subject to the phone’s capabilities.) to greatly
significantly shorten the time it takes for your
headset to stop transmitting audio after the end of
a call.
Please refer to
Section 6: Enhancing
Functionality of the BTA II
for instructions on
how to
auto-configure
your BTA II to its optimal
settings for your mobile phone.
3.
PROBLEM:
I am not able to Answer/End calls or Voice Dial
using the headset’s
Answer/End
button.
ACTIONSOLUTION:
