Advanced Features
6. Enhancing Functionality of the BTA II
Enhancement # 1 -
AUTO-CONFIGURATION
It is recommended that you
auto-configure
your BTA II for
use with your mobile phone, as it is very likely to improve the
performance of the BTA II.
Auto-configuring
your BTA II could provide you with the
following benefits:
−•
Up to 40% extended battery life of the BTA II
−•
Added support for
Answer
/
End
/
Voice Dial
using the
headset’s
Answer/End
button.
HOW TO AUTO-CONFIGURE THE BTA II FOR USE WITH
YOUR MOBILE PHONE:
1. Make sure the headset and BTA II are turned ON and
that the BTA II is plugged securely into the phone’s
headset jack. Keep Make sure the enclosed Stylus is
available for usewithin reach.
2. In
USA
Ccall
1-80088-GO CARDO10
onfrom your
mobile phone.
In Europe or internationally, call _____________).
+49
180 GO CARDO
.
If any of these access numbers don't work for you, visit
our website for updated phone numbers
http://www.cardowireless.com/adapter.php
2.
When you begin to hear a recording through the headset,
gently insert the enclosed Stylus into the BTA’s pinhole
(marked SET). in order to
press and hold the SET
Button for a few seconds until the LEDs turn solid
red
,
.
4.3. ReleaseRelease the
SET Button
Immediately.
Wait until the red LED shuts off and the blue LED
begins flashing every 3 seconds. This process may take
up to 2 minutes.
5.4. Your BTA II is now configured to its optimal settings for
your mobile phone.
5. You should now test the device by using the headset’s
Answer/End button for
Answer
,
End
, and
Voice Dial.
If these features still do not work, thaen your mobile
phone does not support them and you will always have
to use your mobile phone’s keypad whenever you wish
to use these functions.
