CARDIOSTRONG CST-FX80, Руководство по сборке и эксплуатации

Страница: 39 / 56

FX 80
39
No pulse display
+ Sources of interference in
the room
+ unsuitable chest strap
+ Wrong position of chest
strap
+ Chest strap defective or
battery empty
+ Pulse display defective
+ Eliminate sources of interference (e.g.
mobile phone, WLAN, lawn mower
and vacuum cleaner robot, etc. ...)
+ Use a suitable chest strap (see
RECOMMENDED ACCESSORIES).
+ Reposition chest strap and/or
moisten electrodes
+ Changing batteries
+ Check if pulse display by hand pulse
possible
5.3 Error Codes and Troubleshooting
The electronics of the equipment continuously carries out tests. In case of deviations, an error code
appears on the display and normal operation is stopped for your safety.
+
E-1
: Console does not receive hand pulse sensor signal during body fat programme
Make sure that there is enough contact to the hand pulse sensors. Check the cable connections
of the hand pulse sensors and/or the console. If the problem persists, contact technical support.
+ E-2/E-7 : Problem with cable connection on motor detected
Check the cable connections. If the problem persists, contact technical support.
+
E-3
: Console does not receive signal from motor, speed sensor, power connection
Check the cable connections. If the problem persists, contact technical support.
+
E-4
: The body fat percentage value is not in the 5%–50% range.
Check the user settings (age and weight). If the problem persists, contact Technical Support.
+ E-5 : Motor fault detected
Contact technical support.
Please contact Sport-Tiedje for technical support.