CARDIOSTRONG CST-EX9, Руководство по сборке и эксплуатации

Страница: 13 / 44

EX 90
13
Step 3: Assembly of the left side bar (C1) and covers
(1) Connect the left side bar (C1) on the
main frame (A) with a screw (J8) on top
and two screws (J2) and the holder (F2)
on the bottom (see step 2).
(2) Now you can tighten all of the screws
from the previous steps (F5, J8 and J2).
(3) Loosen the two screws (F6) from the
main mast (F1).
(4) Mount the covers (F3 and F4) on
the main mast (F1) with the previously
loosened screws (F6).
Step 4: Assembly of the pedal bars
(1) Connect the right pedal bar (B2) on
top with the main frame (A) and mount
this with the nuts (J4), washers (J9) and
screws (J3); see figure C.
(2) Mount the pedal bar on the bottom of
the main frame with a bolt (J5), a washer
(J9) and a nut (J4); see figure D.
(3) Tighten the bolt (J5) and the nut (J4);
see figure E.
(4) Repeat the process for the left pedal
bar (B1).