14
BC
70
2.3
Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 1:
Assembly of the front and back feet
1. Mount the rear base foot (IV-C) on the frame (A) with two washers (IV-N2), two spring washers
(IV-N15) and two screws (IV-N1).
2. Then mount the front base foot (IV-B) on the frame (A) with two washers (IV-N2), two spring
washers (IV-N15) and two screws (IV-N3).
L
NOTICE
If the equipment is not stable after construction, adjust the setting screws on the underside of
the base foot (IV-C1) correspondingly.
Содержание CST-BC70-B-2
