CARDIOSTRONG BALTIC, Руководство по сборке и эксплуатации, Страница: 17 / 40

17
Step 4: Connecting the tank to the rail
1. Mount the rail (H-1) to the tank (B-1) with ten washers (K-2) and ten screws (K-1).
2. Tighten everything.
Step 5: Alignment of the feet
1. If the floor is uneven, you can stabilize the equipment by turning the two setting screws under
the main frame.
2. Lift the equipment on the desired side and rotate the setting screws under the main frame.
3. Rotate the screws clockwise in order to remove them and to raise the equipment.
4. Rotate them counterclockwise in order to lower the equipment.