8
Qualified personnel must be contacted in the following cases:
−
Installation (
F
ollow
ing
the manufacture
r
s instructions);
−
When in doubt about operating the appliance;
−
Replacing the electrical
supply
.
Service Centres authorised by the manufacturer must be contacted in the
following cases:
−
If in doubt about the soundness of the appliance after removing it from the packaging;
−
If the power supply cord has been damaged or needs to be replaced;
−
If the appliance breaks down or functions poorly; ask for original spare parts.
It is a good idea to do the following:
−
Only use the appliance to cook food;
−
Check the soundness of the appliance after it has been unpacked;
−
Disconnect the appliance from the electrical mains if it is not functioning properly and before
cleaning or performing maintenance;
−
When the appliance is not used for an extended period of time,
disconnect
the supply of power
.
−
Use
oven mitts
to place cookware in the oven or when removing it;
−
Always grasp the oven door in the centre
as
the ends may be
come
hot due to the escape of
hot air;
−
Make sure that the control knobs are on the “o”setting when the appliance is not in use;
−
Cut the power supply chord after disconnecting it from the mains when you decide not to use
the appliance any longer.
The manufacturer
will
not be held responsible for any damage due to incorrect
installation, improper, incorrect
or
irrational use.
Installing the Appliance
Important:
T
he power supply to the appliance must be
disconnected
before any
adjustments or
maintenance work
can be
performed.
Installation of Built-in Ovens
To ensure the proper working order of the built-in appliance, the kitchen
cabinetry
must
be of a suitable size.
The sizes for installing the
oven
under a worktop or in a
stack
unit are shown in figure
8
(page 10).
