8
Full automatic programming:
This function is used to commence cooking after a certain period of time and with a set duration.
The oven is adjusted to the desired cooking function. The oven temperature is adjusted to the
desired temperature depending on the food being cooked.
First:
Press " " button until you see "
Dur
" on the timer screen. Use " " " " buttons to adjust the
cooking time. Press the " " button to confirm. The time of day will appear on the screen and the
symbol "A" will begin to continuously illuminate.
Second:
Keep pressing the " " button until you see "
End
" on the timer screen. When this appears,
use " " " " buttons to adjust finishing time. Press " " button to confirm. The time of day will appear on
the screen and the symbol "A" will begin to continuously illuminate. The symbol " " disappears until the
time cooking starts.
You can set a time which can be up
to
23 hrs 59 minutes after the time obtained by adding the cooking
duration
to the time of day.
The oven will start operating at the time calculated by deducting the cooking period from the set finishing
time
and will stop at the set finishing time.
The timer will give an audible warning and the symbol
"A" will
begin to flash. After bringing the cooking function and oven temperature knob to "0" position. Pressing
any button for less than 3 seconds will stop the audible warning.
Pressing " " for more than 3 seconds will set the oven to Manual mode.
Please note: Once in Full-automatic mode, the times cannot be changed. If you wish to change times,
you must cancel the automatic prog
r
amme and enter into manual mode. If you need to reset the
automatic mode, you must start again.
Spec
i
fication
1> If you long press on " " or " " for more than 3 seconds, the date will progressively and rapidly
increase or decrease.
2> When setting each of the time functions, if there is no operation for 5 minutes then the oven will return
to manual mode.
3> When setting each of the time functions, pressing on " " for more than 3 seconds will cancel the
current setting and return to manual mode.
4> During the time function setting, pressing on "+" and " " for more than 3 seconds, a beep sounds
which will cancel the current time function setting and enter standby mode.
5> We suggest that you run the oven elements for 15 minutes at 200 degrees to burn off any residue
from their surfaces.