Cardinal DR660, Руководство по эксплуатации, Страница: 9 / 12

8525-M320-O1 Rev-B

DR660 Operation
7
CONFIGURATION, CONT.
GRAVITY COMPENSATION
1. With the display showing
aOff
, press the press lb/kg key 4 times. The display will
change to show
GRAu
.
2. Press the HOLD key.

To Enable the Gravity Compensation mode, press the lb/kg key. The display
will change to On .

To Disable the Gravity Compensation mode, press the lb/kg key. The display
will change to OFF .
3. Press the HOLD key again. The display will change to show GrAu .
4. Press the lb/kg key 3 times.
5. The display will change to show
End
.
6. Press the HOLD key to save the settings and reset the scale.
7. Setup is complete.
GRAVITY COMPENSATION
The Gravity Compensation for your scale has been pre-configured at the factory and should
not require changing in most locations. In the event that the factory settings do not meet
the requirements of your location, contact the factory for the value for your location.
With GrAu enable from the function setting of the Configuration mode, the scale will
use the factory set value of 9.796 for the Gravity Compensation.
If the GrAu is disabled, the scale will use the value obtained from the factory and
entered by the operator for the Gravity Compensation.
TO CHANGE THE GRAVITY COMPENSATION VALUE
1. Press the ON/OFF key to turn on the scale.
2. Press and hold the lb/kg key 3 seconds to enter Gravity Compensation mode, the
display will show 9.796 (or the current value).
3. Enter the desired gravity value (press the lb/kg key to choose number from 0 to 9,
and press HOLD key to move to right digit.
4. Press TARE key (to confirm the entered gravity) and return the scale to the normal
operating mode.