background image

8525-M320-O1 Rev-B 

 DR660 Operation 

TABLE OF CONTENTS 

Introduction .............................................................. 1

Specifications .……................….………….………… 1

Installation ……………………................………….… 2

Display Functions ……..……..…..……….............…. 3

Key Functions …………....................……………….. 4

Operation .....................………………………………. 5

Configuration ………….................…..………………. 6

Gravity Compensation …………….............………… 7

Display Message …...........….…..………..………..... 8

Care and Maintenance ….....................…………..… 8

 

Proper Disposal 

When this device reaches the end of its useful life, it must be properly disposed of.  It must 
not be disposed of as unsorted municipal waste.  Within the European Union, this device 
should be returned to the distributor from where it was purchased for proper disposal.  This 
is in accordance with EU Directive 2002/96/EC.  Within North America, the device should 
be disposed of in accordance with the local laws regarding the disposal of waste electrical 
and electronic equipment. 
 
It is everyone’s responsibility to help maintain the environment and to reduce 
the effects of hazardous substances contained in electrical and electronic 
equipment on human health.  Please do your part by making certain that the 
device is properly disposed of.  The symbol shown to the right indicates that 
this device must not be disposed of in unsorted municipal waste programs. 
 

FCC Compliance Statement  

This equipment generates uses and can radiate radio frequency and if not installed and 
used in accordance with the instruction manual, may cause interference to radio 
communications.  It has been tested and found to comply with the limits for a Class A 
computing device pursuant to Subpart J of Part 15 of FCC rules, which are designed to 
provide reasonable protection against such interference when operated in a commercial 
environment.  Operation of this equipment in a residential area may cause interference in 
which case the user will be responsible to take whatever measures necessary to correct the 
interference. 
 
All rights reserved.  Reproduction or use, without expressed written permission, of editorial 
or pictorial content, in any manner, is prohibited.  No patent liability is assumed with respect 
to the use of the information contained herein.   
 
While every precaution has been taken in the preparation of this manual, the Seller 
assumes no responsibility for errors or omissions.  Neither is any liability assumed for 
damages resulting from use of the information contained herein.  All instructions and 
diagrams have been checked for accuracy and ease of application; however, success and 
safety in working with tools depend to a great extent upon the individual accuracy, skill and 
caution.  For this reason the Seller is not able to guarantee the result of any procedure 
contained herein.  Nor can they assume responsibility for any damage to property or injury 
to persons occasioned from the procedures.  Persons engaging the procedures do so 
entirely at their own risk. 
 

 

Содержание DR660













Отзывы: