Cardinal Detecto, Руководство по эксплуатации

Страница: 9 / 22

7
The SAMPLE key is used to weigh a specific number of pieces to be added to
or removed from the scale in preparation for a new counting operation. The
SAMPLE key is also used to change the sample quantity. Pressing the
SAMPLE key repeatedly will cause the sample size to step in multiples of 10
from 10 to 250. In this manner sample quantities other than the first one
requested by the instrument may be used for counting operations. Sample
quantities may optionally be entered via the numeric keypad in any desired
quantity. The SAMPLE key may be used to return the display to a sample
display from any weight or count display mode.
SAM
PLE
The COUNT key is pressed after removing or adding the sample requested,
to initiate the counting operation and place the display in the COUNT mode.
The COUNT key will return the display to the count mode from any weight
display or sample mode.
COUNT
Pressing the WT/PC key will:
• display the calculated average piece weight from a current sampling and
counting operation
• allow the entry of a known piece weight to be used in a counting operation.
KEY FUNCTIONS, Cont.
WT/PC
Pressing the PRINT XMIT key will transmit RS-232 data to an optionally
installed printer, printing data which is currently shown on the scales display,
along with descriptive headings. See section 6.0 for further information. PRINT
XMIT
Pressing the 1 key while displaying any weight or count information will select
the instrument platform (LOCAL, SCALE #1) for use in all weighing and
counting operations. The SCALE ID digit in the display will show a "1". If a
non-zero tare was previously entered, the net weight will be displayed and the
NET annunciator will illuminate. If no tare has been entered, the weight
displayed will be gross weight, and the GROSS annunciator will illuminate.
1
Pressing the 2 key while displaying any weight or count information will select
an external weight indicator platform (REMOTE, SCALE #2) for use in all
weighing and counting operations. The SCALE ID digit in the display will
show a "2". If a non-zero tare was previously entered, the net weight will be
displayed and the NET annunciator LED will illuminate. If no tare has been
entered, the weight displayed will be gross weight, and the GROSS
annunciator LED will illuminate.
2