Cardinal Detecto DR150, Руководство по эксплуатации

Страница: 4 / 8

8525-M275-O1

DR150/400 2
Congratulations on your purchase of the
Digital Receiving Scale. Your Digital
Receiving Scale is an example of superior
design and craftsmanship. In order to
optimize its function, be sure to read this
instruction manual carefully before use.
Keep instructions handy for future reference.
Description of Parts
Model DR150/400
Main Features

LCD Display
1” digit size displays weight.

Tare/Hold Button
When pressed, one time the scale will
tare (zero out) the load on the platform.
When pressed and held for 2-3 seconds,
the scale will prompt to hold “
H on
” or
not hold “ H off ” the weight displayed
after the load has been removed.

Lb/kg Button
When pressed, converts the weight
display from pounds to kilograms or from
kilograms to pounds.

ON Button
When pressed turns the scale “ON”.

OFF Button
When pressed turns the scale “OFF”.

Auto Shut Off
Powers off the scale after 2 minutes of
nonuse.
Before You Begin
1. Remove scale from its box along with
control panel and the 120V Adapter.
2. If using the 120V Adapter, plug one end
into the receptacle (connector) at the
rear of the scale. Insert the other end
(the adapter) into a 120V outlet.
Battery Installation
The Digital Receiving Scale operates with (6)
“AA” batteries (Alkaline preferred).
1. Place unit upright on a flat surface and
lift platform from top of scale.
2. Remove battery compartment door and
insert batteries into compartment. Make
certain to observe the correct polarity.
3. Replace compartment door and platform
cover on scale.
Auto Shut-off Feature
This feature makes the scale shut-off after 2
minutes of nonuse to conserve the battery.
You can disable this feature and the scale
will operate continuously.
1. With the scale off, press the “UNIT
CONVERSION” button and hold down.
2. Press and hold “ON” button, while
holding the “UNIT CONVERSION”
button down.
3. The display will show “ ” and then
“ ” will appear. The auto-off feature
is now defeated. Release the buttons.
4. To make the auto-off active again,
repeat step 1 and 2 and “ ” will
appear. The auto-off is now functional.
Platform