Cardinal Detecto 850F Series, Руководство пользователя

Страница: 6 / 16

4
SCALE BASE AND COLUMN
ASSEMBLY INSTRUCTIONS, CONT.
Refer to Figure No.1 and follow the instructions provided below for scale assembly.
1. Assemble each wheel to the scale base with four 5/8-11 x 3 1/2" hex head bolts, four
sleeves and eight 5/8 flat washers. To secure the wheel, tighten the bolt against the sleeve
to scale base.
2. Insert column (B) into scale base assembly (A) and secure with the 3/8” flat washers, 3/8”
split lock washers and 3/8-16 hex nuts. NOTE: Detecto decal should be facing toward
platform.
3. Attach the steelyard hanger (D) to the long end of the shock absorber assembly (E).
4. Partially lower the shock absorber assembly (E) into the column (B) with the open side of
the hanger (D) facing towards the back of the scale.
5. Hook the short end of the shock absorber assembly (E) to one end of the load cell
assembly (F). NOTE: Handle load cell with care!! DO NOT drop, bend or twist.
6. Slide the grommet (F1) away from the load cell to the other end of the cable.
7. Slide the grommet (F1) into the slot at the top of the column. NOTE: The slot should be on
the back side of the column.
8. Lower the load cell and shock absorber assemblies into the column. The hanger (D) must
drop through the opening in the scale base assembly.
9. Fasten the top hook bolt of the load cell assembly (F) to the column hanger (B1).
10. Attach the steelyard hanger (D) to the nose iron pivot (A1).
11. Pull out the excess load cell cable in the column leaving enough slack in the cable so as
not to have any side pull on the load cell.
12. Before continuing to Step 13, check scale platform for ease of movement. If rubbing or
binding, check to make sure the scale has been correctly assembled. If it has been
properly assembled, DO NOT attempt to adjust the long lever nose iron (A1), contact your
Detecto dealer. The nose iron has been preset at the factory. NOTE: Scale set up and
operation must be on a level surface. The scale is level when the air bubble is in the target
on the bulls-eye level.
13. Scale base and column assembly is complete. Refer to the Digital Indicator Instructions
which apply to your model of scale for further assembly instructions. Or refer to the
information below for load cell wiring identification of the 850F Model.
Color Function
Green + Excitation
Black - Excitation
Red + Signal
White - Signal
Shield Shield