TROUBLESHOOTING
Status LED’s
The APSWIFI has four (4) LED’s to indicate the communication status of the wireless
connection.
DEFAULT
LED D3
J1
DISC
TX
LED D5
CON
LED D6
LED D4
LED Indication Description
D3 DEFAULT This LED will illuminate to indicate the APSWIFI is in the process of
resetting the configuration. When the reset to defaults is complete you
should see the LED flash 5 times and then go out when it is complete.
D4
DISC
This LED indicates that Discovery Mode is active on the APSWIFI.
Discovery Mode affects whether the APSWIFI can see (find) computers
and devices on the network and whether other computers on the
network can see the APSWIFI.
D5
TX
This LED will illuminate when the APSWIFI has been successfully
connected to a network and will flicker when there is data activity over
the wireless network.
D6
CON
This LED displays the communication status. It will be ON or flashing
rapidly when communications between the APSWIFI and the wireless
network is established.
8527-0570-0M Rev B
APSWIFI Installation and Setup
9
