Cardin RPQ504T10, Инструкция по установке и эксплуатации, Страница: 15 / 52

15
Motor connection
• Connect one of the motor phases to binding post
3
-
F1
; the neutral wire to binding post
4 - C ; and the second motor phase to binding post 5 - F2 .
• Connect the 230V power supply to binding posts 1 and 2 .
• If the motor rotates in the wrong direction, invert the F1 and F2 phase wires.
Selector switch connection
• Wire a selector switch or an open close button between binding posts 7 - 8
-
9
and select the required function using dip-switch
D1
as follows:
Function selection dip-switches for binding posts 7, 8 and 9
dip 1 dip 2 T1 T2 Note
OFF OFF Open Close Default option
ON OFF Sequential button Timer Sequential button = open - stop - close - stop
OFF ON Open Close Dead man function only during closing
ON ON Open Close Dead man function during opening and closing
1
2
3
4
ON
Dip D1