12
BPAro
ENG Revision A
Application, Safety Information
2
Controls and Indicators
Fig. 2.1
Controls and indicators of
the
ABPM devices
Fig. 2.2
Nameplates of the ABPM devices
1
Connection for blood pressure cuff
2
Liquid crystal display (LCD)
3
Button
4
Button
5
Button
6
Nameplate
7
Refer to Operator’s Manual
8
Port for connection to PC (USB) at the rear of
the device
9
On/off switch
10
Lid covering battery compartment
Button Functions
During a long-term measurement the buttons on the
device have the following functions:
To start and stop a measurement and to
confirm entries
To display the most recent measurement
values or error message. Systolic value
“S”, diastolic value “D” and pulse rate
“HR“ are displayed successively.
To mark an event, push the info button
while the measured values are being
displayed. As confirmation, “1111” will be
shown on the LCD display. The related
measurement will be marked in the
measurement value table.
To manually switch the measure interval
between the day phase and the night phase
(see section “Toggling Between Day and
Night Phase”)
1
3
4
5
2
