_________________________________________________________________________________________________________________________
Card Access Security Sensor Bridge V2
Page 6 of 12
Quick Start & Installation Guide
Card Access, Inc.
NOTE
:
The Security Sensor Bridge and its associated drivers provide a good deal of
diagnostic information to assist in deployment of Security Sensor Bridges as well as
placement and testing of wireless sensors. The information below is also included in the
Documentation tab of each driver.
ZGB20 Driver Details
•
Supported Devices:
o
First Security Sensor Bridge in a project
-
Model Number. ZGB20
•
Properties Page Help:
o
Bridge Status: Displayed as “Online” or “Offline.”
NOTE: if the Security Sensor Bridge is offline, all
sensors will register as offline.
o
Last Check-In: Shows the last check-in date and
time of the Security Sensor Bridge.
o
Last Event: Shows the date and time of the last
sensor event, along with the TxID or name of the
sensor and the signal level.
ZGB20-XP Driver Details
•
Supported Devices:
o
Additional Security Sensor Bridges in the same
project
-
Model Numbers. ZGB20
•
Properties Page Help:
o
To view diagnostic information on Expansion
Bridges, refer to the properties page of the primary Security Sensor Bridge ZGB20 driver.
Micro Door/Window Sensor Driver Details
•
Supported Devices:
o
GE Micro Door/Window Sensor
-
Card Access Model Number: GMS10A
-
GE Model Number: NX-454
o
GE Recessed Micro Door/Window Sensor
-
Card Access Model Number: GRS10A
-
GE Model Number: 60-741-95
NOTE: This driver MUST be used in conjunction with the Card Access Security Sensor Bridge hardware and DriverWorks
driver. GE Wireless Sensors do NOT need to be associated in any way with a specific Security Sensor Bridge in
Composer.
