B-12 OPERATION B-12
WELDING IN STICK MODE
1 Put the electrode holder and cable quick connect
plug into the electrode output receptacle. Turn
clockwise until tight. Connect the work clamp to the
work piece.
2 Set the Pulse on /pulse off/MMA switch to
"MMA".
3 Set the Pulse on /pulse off/MMA Switch to the
MMA mode desired for the type of electrode being
used (most commonly DC+).
4 Place the electrode in the electrode holder.
In Stick Mode the output terminal and electrode
will be electrically hot whenever the power
switch is turned on.
5 Turn the power switch to "ON".
6 Adjust the Current Control to the desired amps.
7 Strike an arc and weld.
NOTE: When the Pulse on /pulse off/MMA switch is
set to "MMA" the output is always on when the
power switch is on. A remote control has no effect
on the welding current and the gas flow and high
frequency TIG arc starter are disabled.
RECOMMENDED ELECTRODE AMPERAGE RANGES
.
SMAW Process
Welding Amp Range for Stick Electrode Size
ELECTRODE TYPE
POLARITY
3/32"
1/8"
5/32"
E6010
DC+
40 -70
75 - 130
90 - 175
E6011
DC+
40 - 80
55 - 110
105 - 135
E6013
DC+
70 - 95
100 - 135
145 - 180
E7014
DC-
75 - 95
100 - 145
135 - 200
E7018
DC+
85 - 110
110 - 160
130 - 200
Stainless
DC+
40 - 80
75 - 110
95 - 150
Содержание TIG160PDCHF
Страница 24: ...B 10 OPERATION B 10...
Страница 25: ...B 11 OPERATION B 11...