LIN
E UP WITH SPIN
DLE
CTR LIN
E ON
LOCK
FRONT
FACE
BACKSET
EXTRUSION
THIC
KNESS
TOP
DRILL
9
SPIN
DLE
CTR LINE
DRILL
14
DRILL
9
DRILL
9
LINE UP WITH SPINDLE
CTR LINE ON LOCK
BACKSET
EXTRUSION
THICKNESS
TOP
DRILL
8
2A
Insert lock into
door cavity.
ENSURE BOLT IS
EXTENDED.
2B
Secure with
2x M4x16mm CSK
Screws (supplied
with lock).
2. DRILLING TEMPLATE INSTRUCTIONS
T h e N e x t G e n e r a t i o n i n L o c k i n g
C F B - E H F L I P B O L T M O R T I C E L O C K - E G R E S S H A N D L E
2C
Insert drilling template
into cutout and against lock
face as shown.
Identify the colour that lines
up (closest) with the door
edge face.
2E
Remove the 2x
M4x16mm CSK
Screws and lock
from the door.
2F
Drill the following
holes as shown on the
diagram.
2G
Preparation for installation of
egress handle furniture and lock
into metal door is now complete.
Continue with egress handle
furniture installation instructions
section 3.
Drill Ø9 hole
Drill Ø14 to 19 hole
Drill Ø9 hole
Drill Ø9 hole
LINE UP WITH SPINDLE CTR LINE ON LOCK FRONT FACE
BACKSET
EXTRUSION THICKNESS
TOP
DRILL
9
SPINDLE
CTR LINE
DRILL
14 to 19
DRILL
9
DRILL
9
2D
To determine the correct
backset position, align the
corresponding same coloured line
at the top and bottom, as shown
on the diagram.
Ensure template is straight.
To determine the vertical position
of the template, align the spindle
ctr line with the spindle line on the
lock
Mark drilling holes.
LINE UP WITH SPINDLE CTR LINE ON LOCK FRONT FACE
BACKSET
EXTRUSION THICKNESS
TOP
DRILL
8
SPINDLE
CTR LINE
DRILL
14
DRILL
8
DRILL
8
Spindle
Line
