Carbine 76CSR, Руководство пользователя

Страница: 8 / 28

8
Lock / Arm
Press and release the button to arm the security system and lock
the doors. The parking lights will flash
one time. (door lock control
must be installed)
Unlock / Disarm
Press and release the button to disarm the security
system and unlock the doors. The parking lights will flash
two
times. (door lock control must be installed)
Silent Arm / Disarm
Press and release the button before pressing the or
button to initiate silent mode. The system will LOCK or UNLOCK
without arming or disarming chirps.
Note:
If the system had previously been triggered, the tamper
warning chirps will always sound upon disarm.
Disarm without the Remote Control
Your CARBINE system has an override mode that allows you to
disarm your system in the event that you have lost or damaged
your remote controller.
- While the alarm is sounding, turn the ignition key to On, then press
and
release the valet switch button. This will disarm the system.
Note: If your system was installed and programmed to
“Automatically Arm”, the system should be placed into
“Valet Mode” to prevent it from becoming re-armed until
you can correct the issue with your remote control.