Carbine 34cs, Руководство пользователя

Страница: 12 / 24

12
Forced Passive Arming
As additional protection, the Forced Passive Arm feature will
arm the security system 1 hour after exiting the vehicle. In some
cases, you may forget to press the button to arm your
system. Forced Passive Arming will keep the vehicle protected.
By default, this system is ON and active unless programmed
differently by the installer.
Automatic Starter Disable
The purpose of this feature is to keep your vehicle from being stolen
at all times. This system is activated independently of all other
systems. After turning the ignition key off, the Auto Starter Disable
system will begin to count down. The LED indicator on the RCC will
begin to flash. 30 Seconds later, the security system starter disable
circuit will be active. To start the vehicle, it will be necessary to
disarm the system using the remote controller.
Nuisance Prevention System
To prevent continuous alarm cycles from faulty and over-sensitive
sensors or an attempted theft that has left a protected door open,
the Nuisance Prevention System will monitor all trigger inputs.
If the alarm triggers (3) times with a 60-minute period from the
same sensor, the NPS will interpret this as a false trigger. The NPS
will ignore the affected sensor while leaving all other sensors and
triggers active.