Carbide 3D Shapeoko HDM, Руководство по началу работы

Страница: 8 / 32

6
docs.carbide3d.com
Shut Off Machine When Not in Use
Always power down the machine after each use: enable the spindle lock-out, disable the power to the machine,
then turn off the power switch on the electronics cabinet. Wait 5
– 10 minutes, then shut off the chiller.
Fire Prevention
Never run the spindle with the chiller turned off. Consider the possibility of a fire caused by friction from the
spindle and take suitable fire prevention precautions (e.g. having a fire extinguisher handy and other suitable
precautions).
Power Requirements
A 20A circuit is recommended to run the HDM. Two separate outlets are required: one for the electronics
cabinet and one for the chiller.
End Mill Safety
Use care when handling end mills — both to avoid being cut and to avoid damaging them. Handling end mills with
suitable gloves, or using a cloth to avoid contaminating them, is recommended. Inspect end mills carefully before
each use, and ensure that they are securely held by the collet.
Debris Disposal
Recycle or safely dispose of milling debris and dust, keeping in mind flammability, (potential) spontaneous
combustion, and chemical considerations. Even natural materials can have disposal implications. For example,
walnut wood dust is allelopathic (it inhibits plant growth), an irritant to the skin and respiratory tract, and
potentially poisonous to some animals. All of these possible disposal implications are in addition to the
spontaneous combustion hazard posed by all types of sawdust.