CARBATEC.C OM.AU
BS-245H
ASSEMBLY
ASSEMBLY INSTRUCTIONS
NOTE: When assembling this leg stand do not
tighten the nuts and bolts until the assembly is
complete.
A.
STAND ASSEMBLY
1.
Using any one of the 4 legs, secure
it to one of two long top braces with
2x short dome head bolt, washer and
nuts.
Fig. A1
2.
Attach opposite leg in the same way,
with dome head bolt, washer & nuts
Fig. A2
3.
Locate and attach the longest mid
rail brace, and attach between the leg
sections approx half way down, with
a single dome head bolt, washer &
nut on each leg.
Fig. A3
4.
Repeat steps 1-3 to assemble the two
remaining legs with long top rail and
long mid rail brace in the same way.
Fig. A1
Fig
. A2
Fig. A3
15
