Caravaggi SP 20, Руководство пользователя и по обслуживанию

Страница: 6 / 19

Ensure you have read & understood the entire manual
before proceeding!!!
Grinding Stump
1. Place cutter wheel directly in front of the stump.
2. Using lever on handle, lock the one wheel brake- for tighter
brake adjustment, turn the knob on top of the brake lever.
3. Pull throttle full on & twist to lock.
4. Turn clutch switch to ON position.
5. Continue to grind to desired depth.
Hints
When grinding over 10" above or below ground, adjust handle
bar for better control & comfort.
On larger stumps, chips may begin to build up under wheels.
Release brake and pull machine towards you so that the chip
pile is directly under the cutting wheel.
Drop cutter wheel down on chip pile all material will discharge
from the machine area.
Be sure the brake is adjusted so that locked wheel will not
creep while grinding.
On larger stumps D
O NOT ALLOW STUMP GRINDER WHEELS TO
DROP INTO HOLE
- fill with chips or change position.
Just complete stump flush with ground, then go back and cut
to desired depth.
After grinding
Allow engine to cool
Wash off grinder
Inspect grinder
Load for transport