Caravaggi Bio 100, Инструкция по эксплуатации и обслуживанию

Страница: 9 / 29

7. START - UP
Caution ! Before starting up the engine / motor check that the bio-
chopper is on a stable surface and that there are no animals or
unauthorised persons in the work zone .
Read the engine / motor manufacturer’s instruction book carefully .
Check that there is oil and fuel in the tank . Fill if necessary .
Petrol engine version
•
Put the selector at position “I” ( Start ) ( fig. 8 ) . Grasp the
starting knob ( fig. 9 ) and pull the cord without force until you
feel the resistance caused by compression , release the knob and
then give a sharp tug to start the engine .
•
Before beginning work let the engine idle for about 1 minute
then take it to maximum revs ( using accelerator lever ) and
proceed with normal use .
Fig. 8 Fig. 9
0
1
Electric motor version
•
Make sure the mains voltage corresponds to the motor rated voltage
(check the rating plate on the motor) .
•
Check that the power supply cable is conected then press the
start / stop button .
Version with tractor coupling
•
Make sure the cardan shaft connecting the bio-shredder and tractor is
in proper working order.
•
Before each use, make sure the cardan shaft is in proper working order
.
•
Check that the bio-chopper is correctly hooked up to the PTO
then proceed with starting .