Caravaggi Ario 100 F, Инструкция по эксплуатации и обслуживанию

Страница: 17 / 27

8. STARTING UP
Important! Before switching on the motor or engine, make sure the is
standing on a flat surface and there are no animals or unauthorised
persons within the range of action of the machine.
•
Read the engine/motor manufacturer’s instruction book carefully.
•
Check that there is oil and fuel in the tank. Fill if necessary.
•
Put the selector at position “I” (Start) (fig.9). Grasp the starting knob
(fig.10-11) and pull the cord without force until you feel the resistance
caused by compression, release the knob and then give a sharp tug to
start the engine.
•
Before beginning work let the engine idle for about 1 minute then take it
to maximum revs (using accelerator lever) and proceed with normal use.
0
1
Fig. 9 Fig. 10
Fig. 11
Starter