Version 24.02.2011
Se
it
e
7
2.1.2.
Installation 5series with TV-tuner port (factory TV-tuner removed)
optical interface harness C1C-BMW01 is needed
Installation of CAN interface analogue to
chapter
2.1.1. Installation 5series w/o TV-port
.
Transfer white (if present), black and optical inserts from vehicle Quadlock connector to the
Quadlock connector of the CAN interface harness TV-BMW01. Connect the CAN interface
harness Quadlock connector to the male Quadlock plug of the navigation computer and the
vehicle harness Quadlock connector to the male Quadlock plug of the CAN interface harness.
The blue factory-TV-tuner port is in found in
the trunk. Remove fibre optics from the blue
TV-port connector. Connect with black
connector of fibre optical interface harness
C1C-BMW01. Obey the direction arrows
on the connector, see
chapter
3. Connections
.
Connect black connector to fibre optical
interface. Connect blue plug to relating
counterpart of C1C-BMW01 harness.
Factory rear-view cameras if present are connected to the factory TV-tuner.
Obey 3.2. Vehicles with factory rear-view camera and factory TV-tuner .
Installation 5series with TV-tuner port continue chapter
4. Device control
.
2.2.
Installation 7series (E65/E66)
Needed parts
1.
fibre optical interface C1C-M36
2.
CAN interface TV-436
3.
CAN interface harness TV-BMW65